Got the West Greenland kayak out to shoot some video about my replica kayak designs. This is my favorite boat when it comes to putting a modern paddler into a traditional kayak. Looking forward to getting some on the water footage when the rain clears and posting a detailed walk through of the kayak...
"Shooting some video about my replica kayak designs"Continue readingCategory: From Instagram
Bending Tests
Been working on bending tests of different types of readily available hardwood. I'm fortunate enough to get my bending oak directly from a sustainable forester here in Oregon, but most builders will be restricted to the stock at their local shop. I'm getting interesting results, hopefully this will let me make broader recommendations when...
"Bending Tests"Continue reading
Doing things a little differently in the shop this week
Doing things a little differently in the shop this week... When Tillamook dairy approached us for a kayak to install in their new visitor center, there was one challenge: the boat needed to match their brand (and their cheese). Normally we skin with dyed nylon coated in polyurethane, but to get such a precise...
"Doing things a little differently in the shop this week"Continue reading
Nested canoe frames
Here are some shots of the nested canoe frames before the skins went on. Super happy with the way these nest- snug so they don't rattle around or become awkward to carry, but with enough tolerance that they nest and un-nest with a smooth motion....
On YouTube: Full trip report on our John Day River test
Full trip report on our John Day River test paddle up on the YouTube channel now. I talk in more depth about the catamaran and removable thwart systems, shaping and performance in wind and waves and rapids. Still very pleased with their performance and got a lot of good info for the next iteration....
"On YouTube: Full trip report on our John Day River test"Continue reading
End of the trip
End of the trip. People always see the and assume we must have to be really gentle with these boats, but Liz plugged a class 3 hole with this one and and when I got back to the boat it was wrapped around a boulder, facing upstream. Literally curled around the rock, and not...
"End of the trip"Continue reading
On YouTube: On the water footage with the nesting canoes
Just posted a video of on the water footage of the nesting canoes to the YouTube channel. We spent a large portion of the trip with the canoes catamaraned together – an experimental feature that performed beyond expectations, and wound up being fairly critical on this trip to avoid swamping on the class 2...
"On YouTube: On the water footage with the nesting canoes"Continue reading
Thankful for summer, and time on the water.
Thankful for summer, and time on the water. Prototype skin on frame solo canoe from above, packed with flotation and a week's gear. This one is sized for a 175-200lb paddler plus gear, and weighs in at 19lbs. The movable thwart worked out well for seating adjustments and carrying....
Back from a 70-mile wilderness test paddle
Back from a 70-mile wilderness test paddle with lots to report. Video update on the canoes' performance coming later this week, after I've had a chance to edit footage and give the boats a careful inspection....
Answering questions about the adjustable thwart
Been getting a lot of questions about the adjustable thwart. Here’s a close shot of the attachment on the prototype. A series of notches allow it to snap into place in four positions along the gunwales, and then bungee on, wrapping the ribs. Because the ribs are mortised into the gunwales, they can serve...
"Answering questions about the adjustable thwart"Continue reading
And here are all three solo canoes, complete, unnested
And here are all three solo canoes, complete, unnested, with the removable thwarts in place. From left to right: 10′-6″ long, 25″ wide, 9″ deep, 14lbs, 11′-2″ long, 27.5″ wide, 10″ deep, 16lbs, 30″ wide, 10.5″ deep, 19lbs. There’s so much to say about these designs- you saw the nesting, and I had a...
"And here are all three solo canoes, complete, unnested"Continue reading
Reason #2 for a removable thwart: the ability to nest the canoes
Reason #2 for a removable thwart: the ability to store three boats in the space of one. Part of the design challenge for these was to design a measurement system that would not only scale, but also allow different size boats to easily nest for storage and transport. And the weight of all three...
"Reason #2 for a removable thwart: the ability to nest the canoes"Continue reading
First canoe on the water
On the water. Lots of adjustments to make to dial this design in, but ultimately this first round of boats is a success. Working on another video on this portion of the build, and then we’ll take the larger two on a river trip to put them through their paces before starting the build...
"First canoe on the water"Continue reading
Skinned and coated
Skinned and coated. We'll let these sit up and cure for another day, and then get them on the water tomorrow to see how they paddle....
Skinning action shot
Skinning action shot. After the ends are stitched, the skin is wetted down and the sides are stretched and stapled to the gunwales. Here, we're clamping ash strips over the staples. These strips will be screwed down, clamping the skin, and the skin will be cut flush with the top edge....