Day 15, Skin-on-frame rower-sailer. Build time: 1 hr. Started the long, toxic, expensive, annoying process of varnishing all the bits. Generally speaking I’m fanatically anti-brightwork for all the reasons I just listed, and on anything but a row/sailboat I just slap a few coats of pine tar/tung oil mix on whatever needs it and...
"Day 15, Skin-on-frame rower-sailer"Continue readingBlog
Day 14, Skin-on-frame rower-sailer
Day 14, Skin-on-frame rower-sailer. Build time: 5 hrs. Started the day with the boat on the sidewalk and stuffed rolled up beach towels under the sides to get it firmly level. Dropped in the mast step and clamped on the partners and raised the mast. I always leave the two feet above the partners...
"Day 14, Skin-on-frame rower-sailer"Continue reading
Day 13, Skin-on-frame rower-sailer
Day 13, Skin-on-frame rower-sailer. Build time: 4 hrs Hauled the boat outside for some backyard row testing. I’m trying to set the mast partners so they will do dual duty as a backrest. It’s tricky because you don’t want to be whacking into them in normal row mode but you do want it to...
"Day 13, Skin-on-frame rower-sailer"Continue reading
Day 12. Skin-on-frame rower-sailer
Day 12, Skin-on-frame rower-sailer. Build time: 7hrs. Made the decision to move the seats, and made relatively quick work of modifying the seating and relocating the risers. Center seat shifted 5 inches aft, stern seat 10 inches aft, very close to my original plan. Feet now land on the subsequent thwart, as it should...
"Day 12. Skin-on-frame rower-sailer"Continue reading
Day 11, Skin-on-frame rower-sailer
Day 11, Skin-on-frame rower-sailer. Build time: 7hrs. Spent the better part of the morning massacring otherwise innocent lumber in my indecisiveness about how I wanted to make the spars. I ultimately decided that Doug Fir was going to be too heavy, (after cutting it) so I took a deep breath and turned an absolutely...
"Day 11, Skin-on-frame rower-sailer"Continue reading
Day 10, Skin-on-frame rower-sailer
Day 10, Skin-on-frame rower-sailer. Build time: 8 hrs Well, today was f-ing frustrating. I banged out the floorboards set the risers and removable seats, planning for spars and foils tomorrow and then on target to barely catch a window of weather warm and dry enough to varnish. Then I got in the boat for...
"Day 10, Skin-on-frame rower-sailer"Continue reading
Day 9: Skin-on-frame rower-sailer
Day 9, Skin-on-frame rower-sailer. Build time: 4 hrs. It always seems like the finished hull should be more than half the battle but whenever you get strings and sails and metal bits and oars involved, it’s actually only about 1/3rd of the overall cost and work. Even if you’re a hard core minimalist like...
"Day 9: Skin-on-frame rower-sailer"Continue reading
Cape Falcon Kayak 2019 New Years Update
2018 was a year of contrast and polarities. On one hand Cape Falcon Kayak is thriving and on the other I’m still dug in on the front lines in the trench warfare against some pretty serious health issues. I’ve got a lot of good to talk about this year so lets get the bad...
"Cape Falcon Kayak 2019 New Years Update"Continue reading
I was a salvage savage in the years before I got sick
I was a salvage savage in the years before I got sick. Winter storms on the bay, 50 mph winds, my kayak, 400 feet of old crabbing rope, a 20 oz framing hammer, and a PFD stuffed full of log dogs was my happy place. I’ve waged epic battles scratching furiously for the shore,...
"I was a salvage savage in the years before I got sick"Continue reading
Day 8: Skin-on-frame rower-sailer
Day 8, Skin-on-frame rower-sailer. Build time: 3 hrs. Pleased to see the dip in my keel disappeared overnight. Boat has settled at about 43 inches wide which works for me. Put the goop on today. There’s lots of things you can coat a skin boat with but I’ve never found anything even half as...
"Day 8: Skin-on-frame rower-sailer"Continue reading
Day 7: Skin-on-frame rower-sailer
Day 7, Skin-on-frame rower-sailer. Build time: 4 hrs. Put a skin on the boat today, pretty uneventful, fast and easy. I’ve decided not to build any permanent crossmembers into the canoe for now. I think I’m going to set it up with the same system that I use for the pack canoes so I...
"Day 7: Skin-on-frame rower-sailer"Continue reading
Today my friends Tom and Kyle of The Weight We Carry arrived at the Mount Everest base camp with their canoes
Today my friends Tom and Kyle of The Weight We Carry arrived at the Mount Everest base camp at 17,598 feet. For the last 20 days they’ve been trekking with 50 lb packs and 30 lb canoes on their heads, completing this astonishing journey to raise money to build a new women’s shelter in...
"Today my friends Tom and Kyle of The Weight We Carry arrived at the Mount Everest base camp with their canoes"Continue reading
Richard’s tandem canoe
While I wait for the oil on the row-canoe to dry, I wanted to share the first full-size double canoe frame to be built with the new canoe building system. This frame was built by Richard in Maryland. It’s 16 feet long 32 inches wide, 12.5 inches deep. This was intended as a fast...
"Richard’s tandem canoe"Continue reading
Day 6: Skin-on-frame rower-sailer
Day 6, Skin-on-frame rower-sailer. Build time: 7hrs. Started the day by removing the spreaders and then playing with the shape of the frame by adjusting the width. 44 inches was as far as I could go before it started making unsettling noises. At that width it was 13 inches deep which looks nice. I...
"Day 6: Skin-on-frame rower-sailer"Continue reading
Day 5: Skin-on-frame rower-sailer
Day 5, Skin-on-frame rower-sailer. Build time: 7hrs. Spent the morning making new stems and briefly reconsidered changing my whole stringer strategy and even cut a fair amount of wood before coming to my senses. In the afternoon Liz and I worked together tying on stringers which took about three hours to finish the whole...
"Day 5: Skin-on-frame rower-sailer"Continue reading